SimpliSafe Entry Sensor, Motion Gen 2, Glassbreak, Smoke & PIN Pad Battery Replacement Guide
SimpliSafe documentation specifies three distinct cells across its ecosystem: CR2032 (Entry Sensor), CR123A (Motion/Glassbreak/Smoke), and 2x CR2450 (PIN Pad).
Primary specified cellCR123A · 3 VØ17 × 34.5 mm · 1500 mAhLithium manganese dioxide →Trim / variant cellCR2032 · 3 VØ20 × 3.2 mm · 225 mAhLithium manganese dioxide →Trim / variant cellCR2450 · 3 VØ24.5 × 5 mm · 620 mAhLithium manganese dioxide →
Polarity & contact orientation
Match positive (+) orientation shown inside each SimpliSafe sensor bay before sliding onto its wall mount.
Owner-manual replacement procedure
- SimpliSafe Entry Sensor takes a single 3 V CR2032 lithium coin cell (up to 5 years expected life).
- Motion Sensor Gen 2 and Glassbreak Sensor take 1x 3 V CR123A lithium cylindrical cell; Smoke & CO Detector takes 2x CR123A.
- SimpliSafe PIN Pad / Keypad takes 2x 3 V CR2450 large coin cells behind the rear slide bracket (note Base Station uses rechargeable NiMH AA).
Verified OEM documentation
SimpliSafe · How to Replace Batteries in SimpliSafe Devices — SimpliSafe Support — How to Replace Batteries in SimpliSafe Devices
Official SimpliSafe guide specifying CR2032 (Entry Sensor), CR123A (Motion Gen 2, Glassbreak, Smoke & CO), and 2x CR2450 (PIN Pad).