Reference record / Specialty & cylindrical

CR123A battery

A 3.0 V primary lithium cylindrical cell (17.0 x 34.5 mm) with low self-discharge and an internal PTC short-circuit protector.

Technical record

Specifications sourced from a manufacturer publication. Device approval requires separate verification.

Specification plateManufacturer-linked record
CR123ACR123AØ 17 mm34.5 mm10 mm
Drawn at actual size for a 96-dpi display. Confirm with the 10 mm bar.
Reference code
CR123A
Family
Specialty & cylindrical
Nominal voltage
3.0 V
Diameter
Ø 17 mm
Thickness
34.5 mm
Chemistry
Lithium manganese dioxide
01

At a glance

The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.

Nominal voltage
3.0 V
Fresh open-circuit voltage
3.15–3.35 V unloaded fresh cell (replace ≤ 2.9–3.0 V under load)
Diameter
17 mm
Thickness
34.5 mm
Chemistry
Lithium manganese dioxide
Nominal capacity
1500 mAh manufacturer-rated
Typical application
Security sensors, smart locks, tactile flashlights, and cameras
Other known markings
CR17345, EL123AP, 5018LC
Primary CR123A is 3.0 V non-rechargeable. Do not substitute a 3.6-4.2 V rechargeable 16340 Li-ion cell unless the equipment manual explicitly allows Li-ion input voltage.

Verified Datasheet Manufacturers & Distributor Availability

ManufacturerPart DesignationVariant / Coating / Safety NoteDatasheetDistributor / Retail Search
EnergizerCR123A1500 mA max continuous · 3500 mA pulse (internal PTC)Datasheet

Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".

Insulation & Voltage Handling Advisory

High-energy cylindrical cells can discharge hazardous current across metal keys or coins. Store spare cylindrical cells in rigid non-conductive plastic cases, inspect outer PVC sleeves for nicks before installing, and never install 4.2 V charged Li-ion cells (16340 / LIR) into 3.0 V primary devices.

Datasheet runtime estimator

Estimate CR123A runtime

Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.

Presets:

Calculator ready — adjust load or preset above.

02

Dimensions & form

Dimensional diagramNot to scale
CR123AØ 17 mm34.5 mmSide profileTop view
Illustrative geometry. Confirm dimensions against the linked manufacturer specification.
Capacity provenance

Energizer 123 datasheet (Form 123GL1018, ANSI 5018LC / IEC CR17345): 1500 mAh typical rated under 100 Ohm continuous load to 2.0 V cutoff at 21 deg C (1500 mA max continuous).

03

Cross-references and same-size formats

Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.

CodeRelationshipChemistry
CR17345Cross-reference markingLithium manganese dioxide
EL123APCross-reference markingLithium manganese dioxide
5018LCCross-reference markingLithium manganese dioxide

Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.

04

Common questions

What is a CR123A battery and what voltage is it?

A 3.0 V primary lithium cylindrical cell (17.0 x 34.5 mm) with low self-discharge and an internal PTC short-circuit protector. Nominal voltage is 3 V (lithium manganese dioxide) (1500 ma max continuous · 3500 ma pulse (internal ptc)).

What size is a CR123A battery in mm?

CR123A is documented at 17 mm diameter and 34.5 mm thickness. Same-diameter cells with different thickness in this catalog include 16340 (36 mm) — different thickness changes holder contact. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.

What is the CR123A battery equivalent (CR17345, EL123AP)?

Documented cross-reference markings in this catalog: CR17345, EL123AP, 5018LC. A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.

05

Evidence & limitations

These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.

Discharge class

1500 mA max continuous · 3500 mA pulse (internal PTC). Similar dimensions alone do not establish a suitable replacement.

Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.

If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.

Type a battery code, alternate marking, or device name. Press Enter to open.