Reference record / Rechargeable coin

VL2020 battery

A 3.0 V vanadium rechargeable coin cell specified in inductive-charging key fobs, fire alarms, and RTC memory backup.

Technical record

Specifications sourced from a manufacturer publication. Device approval requires separate verification.

Specification plateManufacturer-linked record
VL2020VL2020Ø 20 mm2 mm10 mm
Drawn at actual size for a 96-dpi display. Confirm with the 10 mm bar.
Reference code
VL2020
Family
Rechargeable coin
Nominal voltage
3.0 V
Diameter
Ø 20 mm
Thickness
2 mm
Chemistry
Lithium vanadium pentoxide (rechargeable)
01

At a glance

The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.

Nominal voltage
3.0 V
Fresh open-circuit voltage
3.15–3.35 V unloaded fresh cell (replace ≤ 2.9–3.0 V under load)
Diameter
20 mm
Thickness
2 mm
Chemistry
Lithium vanadium pentoxide (rechargeable)
Nominal capacity
20 mAh manufacturer-rated
Typical application
Inductive remote keyless entry fobs, industrial RTC and fire alarms
Other known markings
No alternate markings listed in this catalog
Requires 3.25-3.55 V constant-voltage charging. Never solder directly onto bare coin surfaces or substitute a non-rechargeable CR2020/CR2032 primary battery.

Verified Datasheet Manufacturers & Distributor Availability

ManufacturerPart DesignationVariant / Coating / Safety NoteDatasheetDistributor / Retail Search
Panasonic EnergyVL2020Rechargeable coin secondary cell (verify CV charge window)Datasheet

Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".

Precision Handling Advisory: Use Non-Conductive Tools

Miniature coin and button cells expose positive (+) and negative (-) terminals across their top and outer perimeter. Handling cells with conductive steel tweezers or metal calipers bridges the gap, causing an instantaneous dead short that degrades cell capacity before installation. Always use non-conductive plastic or carbon-fiber tweezers when placing cells into holders.

Datasheet runtime estimator

Estimate VL2020 runtime

Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.

Presets:

Calculator ready — adjust load or preset above.

02

Dimensions & form

Dimensional diagramNot to scale
VL2020Ø 20 mm2 mmSide profileTop view
Illustrative geometry. Confirm dimensions against the linked manufacturer specification.
Capacity provenance

Panasonic Energy VL2020 datasheet (As of July 2024): 20.0 mAh nominal at 0.07 mA standard drain / 30 kOhm load down to a 2.5 V cutoff at 20 deg C; CV charge 3.25-3.55 V.

03

Cross-references and same-size formats

Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.

CodeRelationshipChemistry
ML2020Same dimensions, separate recordLithium manganese dioxide (rechargeable)

Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.

04

Common questions

What is a VL2020 battery and what voltage is it?

A 3.0 V vanadium rechargeable coin cell specified in inductive-charging key fobs, fire alarms, and RTC memory backup. Nominal voltage is 3 V (lithium vanadium pentoxide (rechargeable)) (0.07 ma standard continuous (3.25-3.55 v cv charge)).

What size is a VL2020 battery in mm?

VL2020 is documented at 20 mm diameter and 2 mm thickness. Same-diameter cells with different thickness in this catalog include CR2012 (1.2 mm), CR2016 (1.6 mm), CR2025 (2.5 mm) — different thickness changes holder contact. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.

What is the VL2020 battery equivalent?

Documented cross-reference markings in this catalog: . Separate catalog records sharing the exact 20 × 2 mm dimensions: ML2020 (3 V lithium manganese dioxide (rechargeable)). A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.

05

Evidence & limitations

These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.

Discharge class

0.07 mA standard continuous (3.25-3.55 V CV charge). Similar dimensions alone do not establish a suitable replacement.

Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.

If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.

Type a battery code, alternate marking, or device name. Press Enter to open.