Reference record / Rechargeable coin

ML2020 battery

A 3.0 V rechargeable manganese-dioxide coin cell offering higher capacity than VL2020 with a 2.8-3.2 V charging window.

Technical record

Specifications sourced from a manufacturer publication. Device approval requires separate verification.

Specification plateManufacturer-linked record
ML2020ML2020Ø 20 mm2 mm10 mm
Drawn at actual size for a 96-dpi display. Confirm with the 10 mm bar.
Reference code
ML2020
Family
Rechargeable coin
Nominal voltage
3.0 V
Diameter
Ø 20 mm
Thickness
2 mm
Chemistry
Lithium manganese dioxide (rechargeable)
01

At a glance

The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.

Nominal voltage
3.0 V
Fresh open-circuit voltage
3.15–3.35 V unloaded fresh cell (replace ≤ 2.9–3.0 V under load)
Diameter
20 mm
Thickness
2 mm
Chemistry
Lithium manganese dioxide (rechargeable)
Nominal capacity
45 mAh manufacturer-rated
Typical application
Dashcams, RTC CMOS backup, and factory automation memory
Other known markings
No alternate markings listed in this catalog
Shares 20.0 x 2.0 mm sizing with VL2020, but ML2020 uses a lower 2.8-3.2 V charging band whereas VL2020 expects 3.25-3.55 V. Match the OEM chemistry.

Verified Datasheet Manufacturers & Distributor Availability

ManufacturerPart DesignationVariant / Coating / Safety NoteDatasheetDistributor / Retail Search
Panasonic EnergyML2020Rechargeable coin secondary cell (verify CV charge window)Datasheet

Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".

Precision Handling Advisory: Use Non-Conductive Tools

Miniature coin and button cells expose positive (+) and negative (-) terminals across their top and outer perimeter. Handling cells with conductive steel tweezers or metal calipers bridges the gap, causing an instantaneous dead short that degrades cell capacity before installation. Always use non-conductive plastic or carbon-fiber tweezers when placing cells into holders.

Datasheet runtime estimator

Estimate ML2020 runtime

Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.

Presets:

Calculator ready — adjust load or preset above.

02

Dimensions & form

Dimensional diagramNot to scale
ML2020Ø 20 mm2 mmSide profileTop view
Illustrative geometry. Confirm dimensions against the linked manufacturer specification.
Capacity provenance

Panasonic Energy ML2020 datasheet (As of July 2024): 45.0 mAh nominal at 0.12 mA standard drain / 20 kOhm load down to a 2.0 V cutoff; CV charge 2.8-3.2 V.

03

Cross-references and same-size formats

Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.

CodeRelationshipChemistry
VL2020Same dimensions, separate recordLithium vanadium pentoxide (rechargeable)

Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.

04

Common questions

What is a ML2020 battery and what voltage is it?

A 3.0 V rechargeable manganese-dioxide coin cell offering higher capacity than VL2020 with a 2.8-3.2 V charging window. Nominal voltage is 3 V (lithium manganese dioxide (rechargeable)) (0.12 ma standard continuous (2.8-3.2 v cv charge)).

What size is a ML2020 battery in mm?

ML2020 is documented at 20 mm diameter and 2 mm thickness. Same-diameter cells with different thickness in this catalog include CR2012 (1.2 mm), CR2016 (1.6 mm), CR2025 (2.5 mm) — different thickness changes holder contact. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.

What is the ML2020 battery equivalent?

Documented cross-reference markings in this catalog: . Separate catalog records sharing the exact 20 × 2 mm dimensions: VL2020 (3 V lithium vanadium pentoxide (rechargeable)). A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.

05

Evidence & limitations

These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.

Discharge class

0.12 mA standard continuous (2.8-3.2 V CV charge). Similar dimensions alone do not establish a suitable replacement.

Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.

If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.

Type a battery code, alternate marking, or device name. Press Enter to open.