01 / OEM replacement specification

Apple AirTag (1st Generation) Battery Replacement Guide

Apple Support specifies a standard 3 V CR2032 lithium coin battery for AirTag and explicitly documents potential bitterant-coating contact interference.

Polarity & contact orientation

Insert the CR2032 positive (+) side facing upward until you hear the chime confirming battery connection.

Owner-manual replacement procedure

  1. Press down on the polished stainless steel battery cover and rotate counterclockwise until it stops rotating.
  2. Remove the cover and depleted battery, then insert a fresh 3 V CR2032 lithium coin cell with the positive (+) side facing up.
  3. Check Apple's bitterant advisory: some CR2032 batteries with child-deterrent bitterant coatings may fail to make electrical connection in AirTag depending on coating alignment with the battery contacts.
  4. Align the three cover tabs with the slots and rotate clockwise until locked.

Verified OEM documentation

Apple Support · How to replace the battery in your AirTag (HT211670 / 102600) — Apple Support HT211670 / Article 102600

Official Apple support notice specifying CR2032 3V coin cell and advising that some bitterant-coated CR2032 cells may fail to make electrical contact depending on alignment.

Inspect manufacturer document ↗

Type a battery code, alternate marking, or device name. Press Enter to open.