Reference record / Rechargeable coin

MT920 battery

A 1.5 V manganese-titanium rechargeable coin cell widely fitted with OEM connector tabs in solar and kinetic watch calibers.

Technical record

Specifications sourced from a manufacturer publication. Device approval requires separate verification.

Specification plateManufacturer-linked record
MT920Ø 9.5 mm2 mm10 mm
Drawn at actual size for a 96-dpi display. Confirm with the 10 mm bar.
Reference code
MT920
Family
Rechargeable coin
Nominal voltage
1.5 V
Diameter
Ø 9.5 mm
Thickness
2 mm
Chemistry
Manganese titanium lithium (rechargeable)
01

At a glance

The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.

Nominal voltage
1.5 V
Fresh open-circuit voltage
1.50–2.50 V accumulator band (1.8–2.6 V charge limit)
Diameter
9.5 mm
Thickness
2 mm
Chemistry
Manganese titanium lithium (rechargeable)
Nominal capacity
5 mAh manufacturer-rated
Typical application
Kinetic and solar analog watch movements
Other known markings
No alternate markings listed in this catalog
Bare MT920 shares 9.5 x 2.0 mm sizing with CTL920F (2.3 V), but differs completely in nominal voltage (1.5 V vs 2.3 V) and charging range (1.8-2.6 V).

Verified Datasheet Manufacturers & Distributor Availability

ManufacturerPart DesignationVariant / Coating / Safety NoteDatasheetDistributor / Retail Search
Panasonic EnergyMT920Rechargeable coin secondary cell (verify CV charge window)Datasheet

Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".

Precision Handling Advisory: Use Non-Conductive Tools

Miniature coin and button cells expose positive (+) and negative (-) terminals across their top and outer perimeter. Handling cells with conductive steel tweezers or metal calipers bridges the gap, causing an instantaneous dead short that degrades cell capacity before installation. Always use non-conductive plastic or carbon-fiber tweezers when placing cells into holders.

Datasheet runtime estimator

Estimate MT920 runtime

Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.

Presets:

Calculator ready — adjust load or preset above.

02

Dimensions & form

Dimensional diagramNot to scale
MT920Ø 9.5 mm2 mmSide profileTop view
Illustrative geometry. Confirm dimensions against the linked manufacturer specification.
Capacity provenance

Panasonic Energy MT920 datasheet (As of July 2024): 5.0 mAh nominal based on standard 0.05 mA continuous drain / 30 kOhm load down to a 1.0 V cutoff at 20 deg C; CV charge 1.8-2.6 V.

03

Cross-references and same-size formats

Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.

CodeRelationshipChemistry
CTL920FSame dimensions, separate recordLithium cobalt titanium oxide (rechargeable)

Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.

04

Common questions

What is a MT920 battery and what voltage is it?

A 1.5 V manganese-titanium rechargeable coin cell widely fitted with OEM connector tabs in solar and kinetic watch calibers. Nominal voltage is 1.5 V (manganese titanium lithium (rechargeable)) (0.05 ma standard continuous (1.8-2.6 v cv charge)).

What size is a MT920 battery in mm?

MT920 is documented at 9.5 mm diameter and 2 mm thickness. Same-diameter cells with different thickness in this catalog include 371/370 (2.1 mm), 373 (1.65 mm), 394/380 (3.6 mm) — different thickness changes holder contact. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.

What is the MT920 battery equivalent?

Documented cross-reference markings in this catalog: . Separate catalog records sharing the exact 9.5 × 2 mm dimensions: CTL920F (2.3 V lithium cobalt titanium oxide (rechargeable)). A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.

05

Evidence & limitations

These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.

Discharge class

0.05 mA standard continuous (1.8-2.6 V CV charge). Similar dimensions alone do not establish a suitable replacement.

Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.

If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.

Type a battery code, alternate marking, or device name. Press Enter to open.