MT621 battery
A 6.8 mm diameter 1.5 V manganese-titanium rechargeable watch cell engineered for high cycle endurance.
Specifications sourced from a manufacturer publication. Device approval requires separate verification.
- Reference code
- MT621
- Family
- Rechargeable coin
- Nominal voltage
- 1.5 V
- Diameter
- Ø 6.8 mm
- Thickness
- 2.1 mm
- Chemistry
- Manganese titanium lithium (rechargeable)
At a glance
The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.
- Nominal voltage
- 1.5 V
- Fresh open-circuit voltage
- 1.50–2.50 V accumulator band (1.8–2.6 V charge limit)
- Diameter
- 6.8 mm
- Thickness
- 2.1 mm
- Chemistry
- Manganese titanium lithium (rechargeable)
- Nominal capacity
- 2.5 mAh manufacturer-rated
- Typical application
- Solar and kinetic wristwatch calibers
- Other known markings
- No alternate markings listed in this catalog
Verified Datasheet Manufacturers & Distributor Availability
| Manufacturer | Part Designation | Variant / Coating / Safety Note | Datasheet | Distributor / Retail Search |
|---|---|---|---|---|
| Panasonic Energy | MT621 | Rechargeable coin secondary cell (verify CV charge window) | Datasheet |
Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".
Miniature coin and button cells expose positive (+) and negative (-) terminals across their top and outer perimeter. Handling cells with conductive steel tweezers or metal calipers bridges the gap, causing an instantaneous dead short that degrades cell capacity before installation. Always use non-conductive plastic or carbon-fiber tweezers when placing cells into holders.
Verified OEM device guides specifying MT621
Datasheet runtime estimator
Estimate MT621 runtime
Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.
Calculator ready — adjust load or preset above.
Dimensions & form
Panasonic Energy MT621 datasheet (As of July 2024): 2.5 mAh nominal based on standard 0.05 mA continuous drain / 30 kOhm load down to a 1.0 V cutoff at 20 deg C; CV charge 1.8-2.6 V.
Cross-references and same-size formats
Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.
| Code | Relationship | Chemistry |
|---|---|---|
| CTL621F | Same dimensions, separate record | Lithium cobalt titanium oxide (rechargeable) |
Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.
Common questions
What is a MT621 battery and what voltage is it?
A 6.8 mm diameter 1.5 V manganese-titanium rechargeable watch cell engineered for high cycle endurance. Nominal voltage is 1.5 V (manganese titanium lithium (rechargeable)) (0.05 ma standard continuous (1.8-2.6 v cv charge)).
What size is a MT621 battery in mm?
MT621 is documented at 6.8 mm diameter and 2.1 mm thickness. Same-diameter cells with different thickness in this catalog include SR621SW (2.15 mm), SR626SW (2.6 mm), SR626W (2.6 mm) — different thickness changes holder contact. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.
What is the MT621 battery equivalent?
Documented cross-reference markings in this catalog: . Separate catalog records sharing the exact 6.8 × 2.1 mm dimensions: CTL621F (2.3 V lithium cobalt titanium oxide (rechargeable)). A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.
Evidence & limitations
These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.
0.05 mA standard continuous (1.8-2.6 V CV charge). Similar dimensions alone do not establish a suitable replacement.
Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.
If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.