ML2032 battery
A 3.0 V rechargeable coin cell sharing the physical 20.0 x 3.2 mm dimensions of a primary CR2032.
Specifications sourced from a manufacturer publication. Device approval requires separate verification.
- Reference code
- ML2032
- Family
- Rechargeable coin
- Nominal voltage
- 3.0 V
- Diameter
- Ø 20 mm
- Thickness
- 3.2 mm
- Chemistry
- Lithium manganese dioxide (rechargeable)
At a glance
The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.
- Nominal voltage
- 3.0 V
- Fresh open-circuit voltage
- 3.15–3.35 V unloaded fresh cell (replace ≤ 2.9–3.0 V under load)
- Diameter
- 20 mm
- Thickness
- 3.2 mm
- Chemistry
- Lithium manganese dioxide (rechargeable)
- Nominal capacity
- 65 mAh manufacturer-rated
- Typical application
- BIOS/RTC backup, industrial PLCs, and sensor nodes
- Other known markings
- No alternate markings listed in this catalog
Verified Datasheet Manufacturers & Distributor Availability
| Manufacturer | Part Designation | Variant / Coating / Safety Note | Datasheet | Distributor / Retail Search |
|---|---|---|---|---|
| Maxell | ML2032 | Rechargeable coin secondary cell (verify CV charge window) | Datasheet |
Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".
Miniature coin and button cells expose positive (+) and negative (-) terminals across their top and outer perimeter. Handling cells with conductive steel tweezers or metal calipers bridges the gap, causing an instantaneous dead short that degrades cell capacity before installation. Always use non-conductive plastic or carbon-fiber tweezers when placing cells into holders.
Datasheet runtime estimator
Estimate ML2032 runtime
Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.
Calculator ready — adjust load or preset above.
Dimensions & form
Maxell ML2032 datasheet (Rev. 24.07, UL MH12568): 65 mAh nominal measured at 200 uA nominal discharge current down to a 2.0 V final voltage at 20 deg C.
Cross-references and same-size formats
Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.
| Code | Relationship | Chemistry |
|---|---|---|
| CR2032 | Same dimensions, separate record | Lithium manganese dioxide |
| BR2032 | Same dimensions, separate record | Lithium carbon monofluoride |
| LIR2032 | Same dimensions, separate record | Lithium-ion (rechargeable) |
Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.
Common questions
What is a ML2032 battery and what voltage is it?
A 3.0 V rechargeable coin cell sharing the physical 20.0 x 3.2 mm dimensions of a primary CR2032. Nominal voltage is 3 V (lithium manganese dioxide (rechargeable)) (200 ua nominal discharge (rechargeable ml series)).
What size is a ML2032 battery in mm?
ML2032 is documented at 20 mm diameter and 3.2 mm thickness. Same-diameter cells with different thickness in this catalog include CR2012 (1.2 mm), CR2016 (1.6 mm), CR2025 (2.5 mm) — different thickness changes holder contact. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.
What is the ML2032 battery equivalent?
Documented cross-reference markings in this catalog: . Separate catalog records sharing the exact 20 × 3.2 mm dimensions: CR2032 (3 V lithium manganese dioxide), BR2032 (3 V lithium carbon monofluoride), LIR2032 (3.7 V lithium-ion (rechargeable)). A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.
Evidence & limitations
These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.
200 uA nominal discharge (rechargeable ML series). Similar dimensions alone do not establish a suitable replacement.
Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.
If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.