Reference record / Specialty & cylindrical

LR1 battery

IEC-LR1 (ANSI N / E90) is a 1.5 V cylindrical alkaline battery measuring 12.0 x 30.2 mm max.

Technical record

Specifications sourced from a manufacturer publication. Device approval requires separate verification.

Specification plateManufacturer-linked record
LR1LR1Ø 12 mm30.2 mm10 mm
Drawn at actual size for a 96-dpi display. Confirm with the 10 mm bar.
Reference code
LR1
Family
Specialty & cylindrical
Nominal voltage
1.5 V
Diameter
Ø 12 mm
Thickness
30.2 mm
Chemistry
Alkaline manganese dioxide
01

At a glance

The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.

Nominal voltage
1.5 V
Fresh open-circuit voltage
1.55–1.60 V unloaded (cutoff 0.90–1.00 V)
Diameter
12 mm
Thickness
30.2 mm
Chemistry
Alkaline manganese dioxide
Nominal capacity
Curves only (no fixed scalar mAh in cited sheet)
Typical application
Laser pointers, glucometers, pagers, and slim flashlights
Other known markings
E90, N, 910A
Do not confuse 1.5 V LR1/N with 12 V A23 (10.3 x 28.5 mm): A23 outputs 8x the voltage and can instantly destroy a 1.5 V instrument.

Verified Datasheet Manufacturers & Distributor Availability

ManufacturerPart DesignationVariant / Coating / Safety NoteDatasheetDistributor / Retail Search
EnergizerLR11.5 V standard cylindrical N / LR1Datasheet

Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".

Datasheet runtime estimator

Estimate LR1 runtime

Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.

Presets:

Calculator ready — adjust load or preset above.

02

Dimensions & form

Dimensional diagramNot to scale
LR1Ø 12 mm30.2 mmSide profileTop view
Illustrative geometry. Confirm dimensions against the linked manufacturer specification.
Capacity provenance

Energizer E90 datasheet (Form E90GL0419, ANSI 910A / IEC LR1) graphs mAh capacity across continuous drain currents to 0.8 V at 21 deg C without printing one fixed scalar mAh figure.

03

Cross-references and same-size formats

Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.

CodeRelationshipChemistry
E90Cross-reference markingAlkaline manganese dioxide
NCross-reference markingAlkaline manganese dioxide
910ACross-reference markingAlkaline manganese dioxide

Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.

04

Common questions

What is a LR1 battery and what voltage is it?

IEC-LR1 (ANSI N / E90) is a 1.5 V cylindrical alkaline battery measuring 12.0 x 30.2 mm max. Nominal voltage is 1.5 V (alkaline manganese dioxide) (1.5 v standard cylindrical n / lr1).

What size is a LR1 battery in mm?

LR1 is documented at 12 mm diameter and 30.2 mm thickness. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.

What is the LR1 battery equivalent (E90, N)?

Documented cross-reference markings in this catalog: E90, N, 910A. A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.

05

Evidence & limitations

These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.

Discharge class

1.5 V standard cylindrical N / LR1. Similar dimensions alone do not establish a suitable replacement.

Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.

If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.

Type a battery code, alternate marking, or device name. Press Enter to open.