A23 battery
A 12.0 V high-voltage miniature alkaline stack (10.3 x 28.5 mm) used in garage openers, RF transmitters, and chimes.
Specifications sourced from a manufacturer publication. Device approval requires separate verification.
- Reference code
- A23
- Family
- Specialty & cylindrical
- Nominal voltage
- 12.0 V
- Diameter
- Ø 10.3 mm
- Thickness
- 28.5 mm
- Chemistry
- Alkaline manganese dioxide
At a glance
The identifying specifications for this format. Read dimensions and chemistry together before considering an alternative.
- Nominal voltage
- 12.0 V
- Fresh open-circuit voltage
- 12.0–12.6 V fresh multi-cell stack (6.0 V test cutoff)
- Diameter
- 10.3 mm
- Thickness
- 28.5 mm
- Chemistry
- Alkaline manganese dioxide
- Nominal capacity
- 55 mAh manufacturer-rated
- Typical application
- Garage door openers, ceiling fan RF remotes, and security transmitters
- Other known markings
- 1181A, MN21/23, KE23A, 4223
Verified Datasheet Manufacturers & Distributor Availability
| Manufacturer | Part Designation | Variant / Coating / Safety Note | Datasheet | Distributor / Retail Search |
|---|---|---|---|---|
| Energizer | A23 | 12 V high-voltage miniature alkaline stack | Datasheet |
Outbound retail and industrial distributor links carry search keywords for verified model strings and are marked rel="sponsored".
Datasheet runtime estimator
Estimate A23 runtime
Ideal capacity math (t = mAh / I_avg) paired with chemistry-specific cutoff & derating checks.
Calculator ready — adjust load or preset above.
Dimensions & form
Energizer A23 datasheet (Form EBC-4412H, ANSI 1181A): 55 mAh typical rated at 20 kOhm continuous load (0.48 mA) down to 6.0 V cutoff at 21 deg C.
Cross-references and same-size formats
Markings below come from manufacturer cross-reference documents; records below share exact dimensions in this catalog. Either way it is a naming or size equivalence, not a device-specific substitution approval.
| Code | Relationship | Chemistry |
|---|---|---|
| 1181A | Cross-reference marking | Alkaline manganese dioxide |
| MN21/23 | Cross-reference marking | Alkaline manganese dioxide |
| KE23A | Cross-reference marking | Alkaline manganese dioxide |
| 4223 | Cross-reference marking | Alkaline manganese dioxide |
Identical dimensions do not imply identical capacity, voltage behaviour or device suitability. Check the device maker's instructions before choosing an alternate. Open the full conversion chart.
Common questions
What is a A23 battery and what voltage is it?
A 12.0 V high-voltage miniature alkaline stack (10.3 x 28.5 mm) used in garage openers, RF transmitters, and chimes. Nominal voltage is 12 V (alkaline manganese dioxide) (12 v high-voltage miniature alkaline stack).
What size is a A23 battery in mm?
A23 is documented at 10.3 mm diameter and 28.5 mm thickness. Measure the original cell and its holder before ordering: a fraction of a millimetre can decide whether a cell makes contact.
What is the A23 battery equivalent (1181A, MN21/23)?
Documented cross-reference markings in this catalog: 1181A, MN21/23, KE23A, 4223. A cross-reference or shared size is a naming or dimensional reference, not a device-specific substitution approval.
Evidence & limitations
These values identify a battery format. They do not establish the fit, electrical requirements, or approval of an alternative in a particular product.
12 V high-voltage miniature alkaline stack. Similar dimensions alone do not establish a suitable replacement.
Reference fields checked against the named manufacturer document on 15 November 2026. This is document transcription, not independent laboratory testing or approval for any particular device.
If manufacturer data conflicts with device instructions, follow the device maker. A listed alternate code requires its own cross-reference evidence.